Standard head support cushion for supine
positioning with centering disc.

Comfort pillow for stable and slightly retroflected positioning of the head.

Pillow for stable positioning of the head. It is higher than the standard Pillow A and supports the head and neck area.

Head support which either can be used alone or mounted on a tabletop using an indexing adapter.

Head support which either can be used alone or mounted on the tabletop using the indexing adapter. Due to the smaller baseplate it can
be moved in cranial/caudal direction.

10° wedge to raise WingSTEP, covered with artificial leather.

10° wedge to increase the height of the WingSTEP. Can be mounted on any indexed tabletop by use of Indexing bars.

The MCT Wedge Indexing Adapter prevents slipping of the MCT Wedge 5 °, 10 ° and 15 ° during treatment and allows the use of MCT Wedge Indexing Bars.

Flexible covered arm support – attached to a ball joint.

Flexible covered arm support – attached to a pin joint.

Flexible covered wrist support – attached to a ball joint.

Washable, leakproof PU Covers.

The WingSTEP Arm Support Elevation Barrel is used to increase the height of the arm shells on the WingSTEP system.

Elevation block with integrated indexing system to increase the height of the WingSTEP. Made of hard plastic.

WingSTEP Baseplate with 4 ball joints, without arm supports and pillows.

The HeadSTEP upper plate for WingSTEP was designed for the routine immobilization of the head. It is an extension of the WingSTEP system.

The adjustable WingSTEP pole bar allows the patient to hold on during the examination at the head end.

The adjustable WingSTEP Pole Bridge Bar allows the patient to hold on to the head end during the treatment. Through 5 individually adjustable locks, it enables a constant, precisely reproducible position of the upper and lower arms and gives the patient a secure feeling.

iCAST mask material for head immobilization. To be used with the HeadSTEP Upper Plate for WingSTEP.